★ 5.0

SQUAREFORGE Department
Pocket Hole Jigs
Machined pocket hole, dowel, corner and mortise jigs for strong, hidden joints that line up
11 tools
★ 5.0
★ 5.0
★ 4.3
★ 5.0
★ 5.0
★ 4.2
★ 4.9
Know before you buy
Pocket Hole Jigs
A pocket hole jig drills an angled hole so a screw can pull two boards tight. Clamp the parts to keep them aligned while drilling and driving the screws. Pocket screws can hold the joint immediately; if you add glue, follow its curing instructions. Check the guide sizes and stock-thickness range for the jig you choose.
What board thickness can I join?
Most jigs are set for 1/2 in. to 1-1/2 in. stock. Match the collar on the step drill to the board thickness shown on the jig.
Pocket holes or dowels?
Pocket screws fasten a joint immediately, but the parts should still be clamped during assembly. Dowels conceal the fastener and usually rely on glue, which must cure before the joint is loaded.
What warranty and returns do I get?
Every tool ships free in the US with a 12-month warranty and 30-day returns.
Buying guide
How to choose a joinery jig
The right jig turns joinery from guesswork into a repeatable setup. Machined aluminum bodies hold their reference faces, so every hole lands at the same depth and angle.
Match the jig to the joint: pocket holes for fast cabinets and face frames, dowels for hidden alignment, mortise and dovetail jigs for furniture that shows its craft.
Pocket or dowel?
Pocket holes are faster and need fewer clamps; dowels hide completely and align panels.
Set the stop collar
Bit depth is what makes a pocket joint hold. Set it once per stock thickness.
Clamp across the joint
A face clamp keeps boards flush while screws pull the joint closed.
Read the full guides
- Woodworking Jigs: How to Choose the Right One
- Pocket hole jig setup: drill depth, screw length and clamp settings
- Dowel jig vs. pocket hole: which is stronger, and when to use each
- Mortise and tenon by router: template guides and stop collars
- Dovetail jig setup: template alignment and test-cut fitting
- How to choose a dowel jig for cabinet and furniture work
Common questions
What stock thickness do the jigs handle?
Most cover 1/2 in. to 1-1/2 in.; check each listing.
Are the jigs aluminum?
Materials vary by product and option. Check the material listed on each product page.
Is there a warranty?
Every SQUAREFORGE tool has a 12-month warranty and 30-day returns.











