★ 5.0

SQUAREFORGE Department
Honing Guides & Chisel Jigs
Honing guides, diamond plates and blade care tools that keep chisels, irons and saw blades razor sharp
10 tools
★ 5.0
★ 5.0
★ 4.2
★ 4.9
★ 5.0
★ 5.0
★ 5.0
★ 4.5
Know before you buy
Honing Guides & Chisel Jigs
A honing guide holds the chisel or plane iron at the same angle on every stroke, so you get a flat, sharp bevel instead of a rounded one. Finish on a strop for a polished edge.
What angle should I sharpen at?
25° is a good primary bevel for chisels and plane irons; add a 30° microbevel for durability.
What width blades fit?
See the listing for the supported blade width range.
What warranty and returns do I get?
Every tool ships free in the US with a 12-month warranty and 30-day returns.
Buying guide
How to keep edges sharp
A sharp edge is the difference between a clean paring cut and torn fibers. Honing guides hold the bevel angle so every session repeats the last.
Check sharpening surfaces for flatness and wear; removing pitch buildup helps maintain saw blades.
Hold the angle
Set the guide for the bevel angle recommended for your blade and confirm its supported adjustment range.
Work through the grits
Coarse to repair, medium to sharpen, fine to polish.
Clean blades cut better
Remove pitch buildup before it burns the wood.
Read the full guides
Common questions
Do diamond plates need oil?
Follow the plate manufacturer's lubrication and cleaning instructions.
Is there a warranty?
Every SQUAREFORGE tool has a 12-month warranty and 30-day returns.










