★ 5.0

SQUAREFORGE Department
Diamond Sharpening Plates
Honing guides, diamond plates and blade care tools that keep chisels, irons and saw blades razor sharp
11 tools
★ 5.0
★ 4.5
★ 4.9
★ 5.0
★ 5.0
★ 5.0
Know before you buy
Diamond Sharpening Plates
Diamond plates use an abrasive coating on a backing surface rather than a water stone that wears down during sharpening. Check the plate's flatness and condition before precision work. Use a coarse grit to repair chips, a medium grit to set the bevel and a fine grit to polish.
Do they need flattening?
Diamond plates are not normally flattened like water stones. Check the backing for distortion and follow the manufacturer's care instructions; a damaged plate may need replacement.
Water or oil?
Follow the plate manufacturer's instructions for lubrication and cleaning. Do not assume every plate is intended for the same lubricant.
What warranty and returns do I get?
Every tool ships free in the US with a 12-month warranty and 30-day returns.
Buying guide
How to keep edges sharp
A sharp edge is the difference between a clean paring cut and torn fibers. Honing guides hold the bevel angle so every session repeats the last.
Check sharpening surfaces for flatness and wear; removing pitch buildup helps maintain saw blades.
Hold the angle
Set the guide for the bevel angle recommended for your blade and confirm its supported adjustment range.
Work through the grits
Coarse to repair, medium to sharpen, fine to polish.
Clean blades cut better
Remove pitch buildup before it burns the wood.
Read the full guides
Common questions
Do diamond plates need oil?
Follow the plate manufacturer's lubrication and cleaning instructions.
Is there a warranty?
Every SQUAREFORGE tool has a 12-month warranty and 30-day returns.











